各位做富士康、綠點的大佬請注意，祥樹目前有一批雄克庫存，中國定制型號，富士康、綠點，國內貿易商僅祥樹可做，歡迎來詢！不要懷疑，祥樹跟雄克有簽框架協議。也歡迎各位大佬咨詢雄克其他型號產品，價格驚喜，給力！！！
MMSK-22-PNP-China為MMSK-22-PNP加長版，長度由3m增加至5m，更貼合現場實際需求。
以下為該產品相關資料
Description
Magnetic switches are used for monitoring the status of automation components. They detect the approach of a magnet without contact and, above a certain switching threshold, enable their output.
Field of application
Used for monitoring gripping and rotary modules, as well as linear modules, and robot accessories. Magnetic switches from SCHUNK detect metals without contact or wear, and are resistant to vibration, dust, and humidity. Magnetic switches are installed in slots and thus do not produce any additional interfering contours.
Technical data MMSK-22-PNP-China
| Ident.-Nr. | 301034 |
| Measuring principle | magnetic |
| Switching function | Closer |
| Type of switching | PNP |
| Number of switching points | 1 |
| min. ambient temperature [°C] | -10 |
| max. ambient temperature [°C] | 70 |
| LED display in sensor | yes |
| Type of voltage | DC |
| Nominal voltage [V] | 24 |
| Min. voltage [V] | 10 |
| max. voltage [V] | 30 |
| Voltage drop [V] | 2 |
| Max. switching current [A] | 0.005 |
| Cable connector/cable end | open wire strands |
| Cable length [cm] | 200 |
| Cable diameter [mm] | 2.1 |
| Min. bending radius (dynamically) [mm] | 21 |
| Min. bending radius (statically) [mm] | 10.5 |
| Product weight [kg] | 0.04 |
| Tightness IP (sensor) | 67 |
| CE | 0 |
現貨圖片如下，一盒25根。
